Major component install

After all the welding on the frame was finished, I stripped/sanded/wirewheeled it down.  The treated it with Metal-Prep.  After the surface was ready I brushed on so POR-15 followed by Chassis Coat.
I then got the engine, transmission, and transfer case bolted in.  The Tub and bulkhead have been added.

Rear springs installed.  Using the 109 rear Salisbury until I can get the D110 rear fitted with an ARB.

I need to get a pair of rear parabolics to go up front, until then using the old rears I had.
The D110 front Salisbury has been totally stripped down, all of the coil suspension brackets removed, leaf perches built, and everything coated in POR15.  Ready to get it under the vehicle.